enLanguage

Expertises

Raspberry Pi 3A+ 3b+ Display 2.8 Inch 320X240 LCD Driver Board with Spi Interface

Raspberry Pi 3A+ 3b+ Display 2.8 Inch 320X240 LCD Driver Board with Spi Interface

​The LCD driver board is interconnected with the MCU using a parallel bus. The bus width is 8 bits. For the MCU data below 8BIT/pixel, you can choose to use a standard color palette. The graphics card provides the MCU with a virtual memory corresponding to the pixels of the display, and all the display data of the MCU only operates on the "virtual memory".

Send Inquiry
Product Introduction

We began our endeavor as a professional provider of electronic circuit board manufacturers, air humidifier driver board, pcb box build assembly services and achieved our sound reputation based on the advanced design and superb quality of our products. Through a scientific and new management model, we have created a stable and experienced technical team. After years of operation, we have accumulated rich practical experience in product development, quality management, customer service and cost control.

1

The LCD driver board is interconnected with the MCU using a parallel bus. The bus width is 8 bits. For the MCU data below 8BIT/pixel, you can choose to use a standard color palette. The graphics card provides the MCU with a virtual memory corresponding to the pixels of the display, and all the display data of the MCU only operates on the "virtual memory". The MCU can update the data of the virtual video memory to the real video memory at any time, which is convenient for control. The advanced video memory management mechanism is adopted internally, which prevents the flickering and screen jumping that occur in the display control of various chips.


LCD driver board parameters

Interface timing modes: SYNC and DE modes.

Panel supply voltage: 3.3V/5.0V/12V optional.

Maximum clock frequency: 135MHz.

Video signal: Analog RGB split input, bandwidth 140MHz, impedance 75, 0.7p-p. .

Maximum display colors: 1.67 million colors.

Sync signal: HV split/composite (with adapter board), horizontal: 30-80KHz, vertical: 60-75Hz, any polarity.

Working voltage: DC12V+1.0V.

Temperature Range: Operating: -10°C~+60°C, Storage: - 20°C~+70°C.

Humidity range: 90%RH (no condensation).

Size: can be customized

As an Electronic Manufacturing Services (EMS) provider, Tecoo produces and pcb assembles various types of LCD driver boards, providing OEM and custom services.

2


We take customer needs as the core, through continuous organizational changes and management improvements, to provide customers with satisfactory Raspberry Pi 3A+ 3b+ Display 2.8 Inch 320X240 LCD Driver Board with Spi Interface and services. Our company can combine different technologies, talents, products and strategies in a slightly different way, so that our company can obtain more profits and become more successful. We increase the audit of process flow to ensure that it meets the requirements of quality assurance.

Hot Tags: lcd driver board, China, factory, customized, professional, amplifier power supply board, dc motor circuit board, air compressor control board, mini digital amplifier board, prototype PCB assembly services, compressor control module

[[ProKeywords]]

No Information

You Might Also Like