Humidifier control board parameters

1. Energy saving and power saving, the power consumption is only 1/10 to 1/15 of the electric humidifier

2. Working power supply: 90～250VAC

3. Humidity control: 10-95% adjustable, control error ±5%RH

4. Temperature control: adjustable from 0 to 60°C, control error ±2%RH

5. The wind speed is generally within 2.5m/s. When it is greater than 2.5m/s, it is required to install a water baffle

6. Resolution: temperature 1℃, humidity 1%RH

7. Power consumption: 2W (220VAC)

8. Good hydrophilicity and water distribution, high humidification efficiency

9. Ambient temperature and humidity: host temperature 5℃∽60℃, relative humidity ≤80%

10. Modular integration, a single core can replace the chip independently.

11. The characteristics of high atomization efficiency, the diameter of the atomized particles of the whole machine is only 1~10μ, and the gasification efficiency can reach 100%.

Humidifier control board features

1. Generate steam: steam is generated by boiling water by electric heating.

2. Control: The generation and supply of steam are controlled by the microcomputer equipped with the humidifier.

3. Propagation: The water vapor is sent into the air flow in the air handler or the air duct through the steam diffusion device. High humidification intensity, uniform humidification, and high humidification efficiency

4. The performance is stable and reliable, and higher humidification control accuracy can be obtained.

5. The electric heating tube adopts low power density design, adopts special anti-scaling treatment method, and has a long service life.

6. Safe circuit design, three-level circuit protection: short circuit, overheating, leakage protection functions make it free from users' worries. Anti-dry burning design, when the electric heating element is exposed to the water surface, the anti-dry burning device starts, cuts off the power supply, and protects the electric heating element from being burned out.